R&S RTM3K-54PK Bundled RTM3004 digital oscilloscope 4 channels, 500 MHz BW, mixed signal option and RTM-PK1 Application Bundle
Key Features and Functions
- 4 analog channels with a bandwidth of 500 MHz (expandable to 1 GHz)
- Input impedance: 50Ω / 1 MΩ with Rohde & Schwarz probe interface / BNC interface / read-out
- Input sensitivity: 500 µV / div to 10 V / div
- 10 bit vertical resolution (up to 16 bit with reduced sampling rate)
- 16 digital channels up to 5 Gsample / s, 40 Msample memory (logic analyzer with 16 digital channels)
- Sampling rate: 2.5 GSa / s per channel; 5 GSa / s in interleaved mode (2 channels)
- Maximum memory depth: 40 MSa (per channel, 1 channel active); 80 MSa interleaved, 400 MSa (standard in 'Segmented Memory' mode
- Signal acquisition rate: 64,000 curves / s
- Various trigger options: edge, width, video (PAL, NTSC, SECAM, PAL-M, SDTV 576i, HDTV 720p, HDTV 1080i, HDTV 1080p), pattern, line, serial bus
- 31 standard auto measurement functions such as peak-to-peak voltage, pos. peak, neg. peak, rise time, fall time, mean value, RMS value, time, period, frequency etc.
- Math functions
- built-in 3 digit digital voltmeter
- Frequency analysis (FFT) and math functions
- Mask test
- Optional: history and segmented memory mode (400 Msample)
- Optional spectrum analyzer
- AWG
- MSO
- Serial decode of:
- I²C
- SPI
- UART / RS-232 / RS-422 / RS-485
- I²S LJ / RJ / TDM
- MIL-1553
- ARINC 429
- CAN / LIN
- Performance analysis
- Frequency response analysis
- History & segmented memory
- Spectrum analysis
- Optional function generator and bit pattern generator
- WXGA TFT touch-screen color display: 25.6 cm (10.1 inch) screen diagonal, resolution: 1280 × 800 pixels, the functions can also be called up in parallel using the controls
- Interfaces: USB 2.0 host, USB 2.0 device, LAN
- Noise level: only 28.3 dB (A)
- 3 year guarantee
RTM3000 Oscilloscope with touch display, USB, LAN, up to 1 GHz BW, 5 GSa/s, 10 bit, 40MPts
The RTM3000 series oscilloscope from Rohde & Schwarz offers a 10-bit analog-to-digital conversion, up to 80 MSample memory depth and a touchscreen display. The large touchscreen display with a diagonal of 25.6 cm (10.1 inches) offers a resolution of 1280 x 800 points and is therefore one of the best in this oscilloscope class. Equipped with the touch function and an intuitive operating concept, you can switch between menus as required or set the scaling, zoom or curve shapes can be shifted on the display.
The 10-bit analog-to-digital conversion leads to a fourfold improvement in the signal display compared to an 8-bit oscilloscope. The signals are displayed much sharper and fine signal details can be seen.
40 MSample memory depth is available per channel. If the interleave mode is switched on, there are even 80 MSample, which leads to a double signal observation period. Overall, this is a multiple of what conventional oscilloscopes in this price range offer.
This is not the only characteristic of the R&S RTM3000 family of oscilloscopes. Additional functions are integrated / optional such as a logic analyzer, protocol analyzer, a spectrum analyzer, a function generator, a bit pattern generator and a digital voltmeter. In addition, special modes for frequency analysis, mask testing and for data acquisition of long measurement sequences are integrated, which simplifies troubleshooting in electronic systems.
With a sampling rate of up to 5 GS / s and a memory depth of up to 80 MSa, the RTM3000 oscilloscope from Rohde & Schwarz is one of the best on the market. With a signal acquisition rate of 64,000 waveforms / s, signal errors can be found quickly and reliably. The integrated standard tools such as QuickMeas, mask test, FFT (Fast Fourier Transformation), math functions, cursor functions and automatic measurements including statistics enable effective measurements and quickly lead to a result.
This oscilloscope meets the repeated demand for investment security and for an attractive price.
RTM3000 Oscilloscope with touch display, USB, LAN, up to 1 GHz BW, 5 GSa/s, 10 bit, 40MPts
The RTM3000 series oscilloscope from Rohde & Schwarz offers a 10-bit analog-to-digital conversion, up to 80 MSample memory depth and a touchscreen display. The large touchscreen display with a diagonal of 25.6 cm (10.1 inches) offers a resolution of 1280 x 800 points and is therefore one of the best in this oscilloscope class. Equipped with the touch function and an intuitive operating concept, you can switch between menus as required or set the scaling, zoom or curve shapes can be shifted on the display.
The 10-bit analog-to-digital conversion leads to a fourfold improvement in the signal display compared to an 8-bit oscilloscope. The signals are displayed much sharper and fine signal details can be seen.
40 MSample memory depth is available per channel. If the interleave mode is switched on, there are even 80 MSample, which leads to a double signal observation period. Overall, this is a multiple of what conventional oscilloscopes in this price range offer.
This is not the only characteristic of the R&S RTM3000 family of oscilloscopes. Additional functions are integrated / optional such as a logic analyzer, protocol analyzer, a spectrum analyzer, a function generator, a bit pattern generator and a digital voltmeter. In addition, special modes for frequency analysis, mask testing and for data acquisition of long measurement sequences are integrated, which simplifies troubleshooting in electronic systems.
With a sampling rate of up to 5 GS / s and a memory depth of up to 80 MSa, the RTM3000 oscilloscope from Rohde & Schwarz is one of the best on the market. With a signal acquisition rate of 64,000 waveforms / s, signal errors can be found quickly and reliably. The integrated standard tools such as QuickMeas, mask test, FFT (Fast Fourier Transformation), math functions, cursor functions and automatic measurements including statistics enable effective measurements and quickly lead to a result.
This oscilloscope meets the repeated demand for investment security and for an attractive price.