We use cookies in order to guarantee the best possible service. If you continue browsing the site you consent to our cookie use.

Keysight U8485A USB Power Sensor; 10 MHz-33 GHz; -33 dBm to +20 dBm

  • Frequency range of DC/10MHz to 33 GHz
  • Fastest measurement speed for thermocouple sensor, > 400 readings/s (free run/fast buffer mode)
  • Best-in-class power linearity of less than 0.8%
  • Wide dynamic range from -35 dBm to +20 dBm
  • Accurate calibration and traceability to US National Institute of Standards and Technology (NIST) or National Physical Laboratory (NPL)
  • BenchVue software enabled
Price
 
kr 44.833*
* excluding VAT free shipping (Denmark)

Product Number:

U8485A

Quantity:

Total
Unit price
base price
Stock
Typically on stock
Expected Delivery Time:
2 Days from Keysight Inventory

Perform measurements down to DC range

The U8480 series is Keysight’s first power sensor with the capability to measure down to DC (with option 200). This is especially useful for Signal Source/Network Analyzer calibration and power references as well as EMC applications.

Built in external trigger in

External trigger will enable accurate trigger of small signals close to the signal noise floor. With the built-in trigger in connection on the U8480-series power sensors; you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.

Measurements direct from your PC

The U8480-series USB power sensors comes with the N1918A power panel software at no additional cost. For enhanced features, the N1918A Power Analysis Manager software is available for purchase separately.

Description
Additional Informations
Reviews
Query on the Item
Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha
Description
Reviews
Query on the Item

Perform measurements down to DC range

The U8480 series is Keysight’s first power sensor with the capability to measure down to DC (with option 200). This is especially useful for Signal Source/Network Analyzer calibration and power references as well as EMC applications.

Built in external trigger in

External trigger will enable accurate trigger of small signals close to the signal noise floor. With the built-in trigger in connection on the U8480-series power sensors; you can connect an external trigger signal from a signal source or the device under test directly to the USB sensor through a standard BNC to SMB cable.

Measurements direct from your PC

The U8480-series USB power sensors comes with the N1918A power panel software at no additional cost. For enhanced features, the N1918A Power Analysis Manager software is available for purchase separately.

Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha