We use cookies in order to guarantee the best possible service. If you continue browsing the site you consent to our cookie use.

ITECH IT8812C Electronic DC load 120 V, 60 A, 250W

additional images:

DC Input Ratings:

  • Maximum power 250 W
  • Resolution: 10 mW
  • Voltage: 0-18 V and 0-120 V
  • Resolution: 1 mV/10 mV
  • Current: 0-6 A and 0-60 A
  • Resolution: 0.1 mA/1 mA
  • Resistance: 0.3-10 Ohm/10 Ohm to 7.5 kOhm

Operating modes:

  • Constant Voltage
  • Constant Current
  • Constant Resistance
  • Constant Power

Setup Accuracy:

  • Voltage: (0.025%+0.05% Full Scale)
  • Current: (0.05%+0.05% Full Scale)
  • Resistance: 0.01%+0.08S
  • Power: 0.2%+0.2% Full Scale

Feature set:

  • Intilligent fan control. Low acoustic noise
  • Accurate readback of current and voltage
  • Readback sampling to 50 kHz
  • Dynamic test to 25 kHz
  • LIST mode with programable rise/fall time
  • SCPI programming
  • Remote sense
  • Extensive protection functions
  • High accuracy and resolution

Connectivity:

  • RS-232 and USB
  • Analog control
Price
 
kr 7.984*
* excluding VAT free shipping (Denmark)

Product Number:

IT8812C

Manufacturer:

ITECH

Quantity:

Total
Unit price
base price
Stock
Call or email for delivery time
  • The IT8800 series of loads covers power ranges from 150~55KW and customized solutions over 55KW.
  • The loads have extensive protection function. OVP/OCP/OPP/OTP.
  • They includes dynamic mode. The highest testing speed of current and voltage is 50KHZ,. Memory for 100 sets of data.
  • The current cumsumption is measured and digitized at a rate up to 50 kHz. For even higher speed a current monitor output is available. The output generates 0-10 Volt signal.
  • The loads supports external analog control as well as built-in RS232 and USB interface to make your control the instrument conveniently. Software is provided to automate test.
  • The programmable high-accuracy electronic load has a special LED mode which supports LED power drive test and programmable interface specifications to simulate LED current.
Description
Additional Informations
Reviews
Query on the Item
Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha
Description
Reviews
Query on the Item
  • The IT8800 series of loads covers power ranges from 150~55KW and customized solutions over 55KW.
  • The loads have extensive protection function. OVP/OCP/OPP/OTP.
  • They includes dynamic mode. The highest testing speed of current and voltage is 50KHZ,. Memory for 100 sets of data.
  • The current cumsumption is measured and digitized at a rate up to 50 kHz. For even higher speed a current monitor output is available. The output generates 0-10 Volt signal.
  • The loads supports external analog control as well as built-in RS232 and USB interface to make your control the instrument conveniently. Software is provided to automate test.
  • The programmable high-accuracy electronic load has a special LED mode which supports LED power drive test and programmable interface specifications to simulate LED current.
Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha