ITECH IT27814E SMU Module 4 Quadrant +/-20 V, +/-3 A, +/-20 W
Key Features and Functions:
- 2 and 4-quadrant operation
- +/-6 and +/-20 V range
- Up to 3 A and 20 W
- Down to 100 pA and 6 uV measurement resolution
- Source: CC/CV/CP(no CP)
- Sink: CC/CV/CR/CP(no CP)
- Programmable output resistance
- CC/CV priority
- LIST mode, Sequence and ARB
- Sine Sweep
- Battery Charge and Discharge
- Battery Simulation
- EIS (Electrochemical Impedance Spectroscopy) function
- Output disconnet relay
Documents and Software Solutions:
The IT27814/IT27814E are four-quadrant SMU modules for low-power device testing, featuring multiple ranges, high sampling rates, and fast transient response. IT27814 supports seamless current auto-ranging, enabling precise capture of transient current from standby to active states. They are ideal for IoT devices, wearables, DC-DC modules, and power ICs.
In addition, IT27814 integrates EIS (Electrochemical Impedance Spectroscopy) for impedance spectrum testing of batteries, inductors, and other components.
The IT27814/IT27814E works with the IT2705 modular DC power analysis platform
IT2705 is designed for dynamic power consumption measurement, battery behavior simulation, and power characteristic research in R&D testing. It combines DC power, electronic loads and arbitrary waveform generator with an intuitive GUI, supports Oscilloscope Sampling and Data Logging function, allowing for the creation of complex testing without the need for secondary development.
The IT2705 supports a variety of functional modules, including DC power modules, bidirectional power supply modules, regenerative loads, and SMU modules, with a power range from 20W to 500W, and can be configured with up to 8 channels. It can be applied for testing IoT devices, chips, automotive electronics, smart wearable devices. It helps engineers deeply analyze dynamic waveforms, instant responses, and key electrical characteristics, improving testing efficiency and accuracy.
The IT27814/IT27814E are four-quadrant SMU modules for low-power device testing, featuring multiple ranges, high sampling rates, and fast transient response. IT27814 supports seamless current auto-ranging, enabling precise capture of transient current from standby to active states. They are ideal for IoT devices, wearables, DC-DC modules, and power ICs.
In addition, IT27814 integrates EIS (Electrochemical Impedance Spectroscopy) for impedance spectrum testing of batteries, inductors, and other components.
The IT27814/IT27814E works with the IT2705 modular DC power analysis platform
IT2705 is designed for dynamic power consumption measurement, battery behavior simulation, and power characteristic research in R&D testing. It combines DC power, electronic loads and arbitrary waveform generator with an intuitive GUI, supports Oscilloscope Sampling and Data Logging function, allowing for the creation of complex testing without the need for secondary development.
The IT2705 supports a variety of functional modules, including DC power modules, bidirectional power supply modules, regenerative loads, and SMU modules, with a power range from 20W to 500W, and can be configured with up to 8 channels. It can be applied for testing IoT devices, chips, automotive electronics, smart wearable devices. It helps engineers deeply analyze dynamic waveforms, instant responses, and key electrical characteristics, improving testing efficiency and accuracy.