FLIR X8580-HS InSb High Definition MWIR Science-Grade Camera
SPECIFICATIONS
- Resolution: 1280 × 1024
- Detector Pitch: 12 µm
- Spectral Range: 1.5 – 5.0 µm
- Detector Type: FLIR Indium Antimonide (InSb)
- Camera f-number: f/2.5
- Dynamic Range: 14-bit
- Frame Rate [Full Window]: Programmable; approx. 0.5 Hz to 181 Hz
- Integration Time: 270 ns to approx. Full Frame
- Standard Temperature Range [with band matched optics]: -20°C to 300°C (-4°F to 572°F)
- Optional Temperature Range [with band matched optics]: 45°C to 600°C (ND1)
- 250°C to 2000°C (ND2)
- 500°C to 3000°C (ND3)
- Filtering: 4-position motorized filter wheel, standard 1-inch filters, user swappable
- Focus: Motorized (compatible w/ manual)
IMAGING & OPTICAL
- Available Lenses: Manual (broadband): 25 mm, 50 mm, 100 mm
- Motorized (broadband): 25 mm, 50 mm, 100 mm
- Camera f-number: f/2.5
- Camera size excl lens (L x W x H): 249 mm × 157 mm × 147 mm (9.8 in × 6.2 in × 5.8 in)
- Close-up Lenses/Microscopes: No microscopes available
- Detector Pitch: 12 µm
- Detector Type: FLIR Indium Antimonide (InSb)
- Digital Zoom: 1x, Auto (best fit)
- Direct to SSD Recording:
- Yes, removable 4 TB NVMe SSD included, approx. 2-hours of zero dropped frames record time
- On-Camera Image Storage:
- RAM (volatile): 64 GB, up to 23,000 frames full frame
- NVMe U.2 SSD (user-removable/non-volatile): 4 TB U.2 SSD included, up to 1.4 M frames full frame
MEASUREMENT & ANALYSIS
- Accuracy: ≤100°C ±2°C (±1°C typical), ≥100°C ±2% of reading (±1% typical)
- Automatic Gain Control: Manual, Linear, Plateau equalization, DDE
- Optional Temperature Range [with band matched optics]: 45°C to 600°C (ND1)
- 250°C to 2000°C (ND2)
- 500°C to 3000°C (ND3)
- Standard Temperature Range [with band matched optics]: -20°C to 300°C (-4°F to 572°F)
COMMUNICATION & DATA STORAGE
- Synchronization Modes: Sync In, Sync Out, Tri-Level Sync, Video Sync
- Trigger Mode(s): Trigger In, Software generated, Time generated
Documents and Software Solutions:
The FLIR X8580-HS InSb midwave IR camera is designed for scientists and engineers who need to capture detailed imagery of high-speed events, perform custom radiometric measurements, or detect points of failure in composites, solar cells, and electronics. This thermal imaging camera combines 1280 × 1024 HD resolution with fast frame rates and integration times, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X8580-HS InSb will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
The FLIR X8580-HS InSb midwave IR camera is designed for scientists and engineers who need to capture detailed imagery of high-speed events, perform custom radiometric measurements, or detect points of failure in composites, solar cells, and electronics. This thermal imaging camera combines 1280 × 1024 HD resolution with fast frame rates and integration times, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X8580-HS InSb will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.