FLIR X6980-HS InSb High-Speed MWIR Science-Grade Camera
SPECIFICATIONS
- Resolution: 640 × 512
- Detector Pitch: 25 µm
- Spectral Range: 1.5–5.0 µm
- Detector Type: FLIR indium antimonide (InSb)
- Camera f-number: f/2.5
- Dynamic Range: 14-bit
- Thermal Sensitivity/NETD: 20 mK, typical
- Frame Rate [Full Window]: Programmable: 0.0015 Hz to 1004 Hz
- Integration Time: Programmable: 270 ns to approx. full frame
- Standard Temperature Range [with band matched optics]: -20°C to 300°C (-4°F to 572°F)
- Optional Temperature Range [with band matched optics]: ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (932°F–5432°F)
- Filtering: 4-position motorized warm filter wheel, standard 1-inch filters, user swappable
- Focus: Motorized (compatible w/manual)
IMAGING & OPTICAL
- Available Lenses: Manual (broadband): 25 mm, 50 mm, 100 mm
- Motorized (broadband): 25 mm, 50 mm, 100 mm
- Camera f-number: f/2.5
- Close-up Lenses/Microscopes: No microscopes available
- Detector Pitch: 25 µm
- Detector Type: FLIR indium antimonide (InSb)
MEASUREMENT & ANALYSIS
- Accuracy: ≤100°C: ±2°C (±1°C typical), >100°C: ±2% of reading (±1% typical)
- Ambient Drift Compensation [with factory cal]: Yes
- Automatic Gain Control: Manual, Linear, Plateau equalization, DDE
- Optional Temperature Range [with band matched optics]: ND1: 45°C–600°C (113°F–1112°F) ND2: 250°C–2000°C (482°F–3632°F) ND3: 500°C–3000°C (932°F–5432°F)
- Standard Temperature Range [with band matched optics]: -20°C to 300°C (-4°F to 572°F)
COMMUNICATION & DATA STORAGE
- Synchronization Modes: Sync In, Sync Out, Tri-Level Sync, Video Sync
- Trigger Mode(s): Trigger In, Software generated, Time generated
Documents and Software Solutions:
The FLIR X6980-HS InSb is an extraordinarily fast midwave IR camera designed for scientists and engineers who need to capture high-speed imagery for accurate thermal analysis and custom radiometric measurements. This thermal imaging camera combines 640 × 512 resolution with blazing-fast frame rates, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X6980-HS InSb will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.
The FLIR X6980-HS InSb is an extraordinarily fast midwave IR camera designed for scientists and engineers who need to capture high-speed imagery for accurate thermal analysis and custom radiometric measurements. This thermal imaging camera combines 640 × 512 resolution with blazing-fast frame rates, allowing researchers to record stop motion on fast-moving subjects or rapid temperature changes—whether in the lab or on the test range. With a four-position motorized filter wheel and support for FLIR motorized focus lenses, the X6980-HS InSb will provide higher quality recordings, save time, and mitigate frustration in dynamic acquisition environments.