ETS-3149 Hybrid Log Periodic and Bowtie (BiConiLog) (80 MHz - 6 GHz)

The 3149 Hybrid Log Periodic and Bowtie (Biconilog) Antenna has an ultra broadband frequency range, accepts high power input, and is size-efficient for easy transport and use in compact chambers. Rugged construction assures dimensional and electrical stability over extended use. The electrical characteristics of this antenna were modeled using powerful workstations running electromagnetic simulation software. Equally important, experienced RF engineers worked with our manufacturing team to produce a practical and affordable realization of the modeling process. On completion, the antenna was tested and calibrated at our A2LA accredited lab facility. All production units are individually calibrated at this facility.ConstructionAn antenna constructed to maximize structural integrity is better able to maintain its electrical properties. The benefits are better measurement repeatability, lower uncertainty values and longer calibration validity. The Model 3149 is constructed to be a rugged antenna that thrives in an environment of constant use. Custom aluminum extrusions are used for the boom material. Dipole elements attach with capped Allen screws for secure attachment, yet allow repair and replacement if necessary. An all-weather, RF transparent radome protects the high frequency element section. Tubular bow-tie elements fit to the balun box using positive aligning-- yet easily attached-- compression fittings. The finished antenna receives a tough, durable powder coat finish. 5Cross PolarizationAntenna performance can be degraded by cross polarization of horizontal and vertical signals. In high frequency log periodics where elements are small and closely spaced, cross polarization can be difficult to avoid. The high frequency section of the Model 3149 was carefully modeled and precision manufactured to avoid this problem. Cross polarization rejection in the Model 3149 exceeds 20 dB, making this antenna one of the few antennas that are compliant for CISPR 16-1 measurements. 3High GainThe Model 3149 accepts up to 750 W of continuous power input at its lower frequencies of operation. The antenna’s high gain and low VSWR over its operating frequency translates into efficient amplifier use for field generation. Contrary to most biconical/log periodic hybrid antennas, the Model 3149 has a relatively low VSWR at its lowest frequency of operation, allowing about half the power to be radiated by the antenna. 2Polarization on Center Point AxisThe Model 3149 was designed with a flexible mounting scheme to accommodate most antenna towers and tripods. The antenna can be securely mounted from the 22 mm diameter rear tube, or with a mount (included) at the center of the lower element boom. The rear tube mounting provides on-axis center point rotation of the antenna during polarization and can be mounted to ETS-Lindgren and most other brands of antenna towers. The receiving tube on the antenna tower can be either square or round. The antenna’s center boom mount can be used with ETS-Lindgren antenna masts having an offset cross-boom, and all tripods. 4Ultra Broadband Combining the best characteristic of Biconical and log periodic antennas, BiConiLogs sweep over a wide frequency range-- ideal for automated testing. The Model 3149’s 80 MHz - 6 GHz frequency range is the broadest and highest of all BiConiLog antennas, and most commercially available antennas of this type. 1

• PDF
• Compare this item

The 3149 Hybrid Log Periodic and Bowtie (Biconilog) Antenna has an ultra broadband frequency range, accepts high power input, and is size-efficient for easy transport and use in compact chambers. Rugged construction assures dimensional and electrical stability over extended use. The electrical characteristics of this antenna were modeled using powerful workstations running electromagnetic simulation software. Equally important, experienced RF engineers worked with our manufacturing team to produce a practical and affordable realization of the modeling process. On completion, the antenna was tested and calibrated at our A2LA accredited lab facility. All production units are individually calibrated at this facility.ConstructionAn antenna constructed to maximize structural integrity is better able to maintain its electrical properties. The benefits are better measurement repeatability, lower uncertainty values and longer calibration validity. The Model 3149 is constructed to be a rugged antenna that thrives in an environment of constant use. Custom aluminum extrusions are used for the boom material. Dipole elements attach with capped Allen screws for secure attachment, yet allow repair and replacement if necessary. An all-weather, RF transparent radome protects the high frequency element section. Tubular bow-tie elements fit to the balun box using positive aligning-- yet easily attached-- compression fittings. The finished antenna receives a tough, durable powder coat finish. 5Cross PolarizationAntenna performance can be degraded by cross polarization of horizontal and vertical signals. In high frequency log periodics where elements are small and closely spaced, cross polarization can be difficult to avoid. The high frequency section of the Model 3149 was carefully modeled and precision manufactured to avoid this problem. Cross polarization rejection in the Model 3149 exceeds 20 dB, making this antenna one of the few antennas that are compliant for CISPR 16-1 measurements. 3High GainThe Model 3149 accepts up to 750 W of continuous power input at its lower frequencies of operation. The antenna’s high gain and low VSWR over its operating frequency translates into efficient amplifier use for field generation. Contrary to most biconical/log periodic hybrid antennas, the Model 3149 has a relatively low VSWR at its lowest frequency of operation, allowing about half the power to be radiated by the antenna. 2Polarization on Center Point AxisThe Model 3149 was designed with a flexible mounting scheme to accommodate most antenna towers and tripods. The antenna can be securely mounted from the 22 mm diameter rear tube, or with a mount (included) at the center of the lower element boom. The rear tube mounting provides on-axis center point rotation of the antenna during polarization and can be mounted to ETS-Lindgren and most other brands of antenna towers. The receiving tube on the antenna tower can be either square or round. The antenna’s center boom mount can be used with ETS-Lindgren antenna masts having an offset cross-boom, and all tripods. 4Ultra Broadband Combining the best characteristic of Biconical and log periodic antennas, BiConiLogs sweep over a wide frequency range-- ideal for automated testing. The Model 3149’s 80 MHz - 6 GHz frequency range is the broadest and highest of all BiConiLog antennas, and most commercially available antennas of this type. 1

• PDF
• Compare this item