We use cookies in order to guarantee the best possible service. If you continue browsing the site you consent to our cookie use.

Desktop Spectrum/Signal Analyzers

FPC Spectrum Analyzer
FPC1000 Entry-Level Spectrum Analyzer 5 kHz-1 GHz
FPC-P2, FPC1000 Entry-Level Spectrum Analyzer 5 kHz-2 GHz
FPC-P3, FPC1000 Entry-Level Spectrum Analyzer 5 kHz-3 GHz
FPC1000-RM, FPC1000 Entry-Level Spectrum Analyzer 5 kHz-1 GHz, including Receiver Mode
FPC-COM1, FPC1000 Entry-Level Spectrum Analyzer 5 kHz-3 GHz, including Preamp, Modulation analysis, Receiver mode and Advanced measurements
FPC-EMI1, FPC1000 Entry-Level Spectrum Analyzer 5 kHz-1 GHz for EMI Debug, includes Preamplifier and Receiver mode
FPC1500 Entry-Level Spectrum Analyzer 5 kHz-1 GHz with tracking generator
FPC-P2TG, FPC1500 Entry-Level Spectrum Analyzer 5 kHz-2 GHz with tracking generator
FPC-P3TG, FPC1500 Entry-Level Spectrum Analyzer 5 kHz-3 GHz with tracking generator
FPC-COM2, FPC1500 Entry-Level Spectrum Analyzer 5 kHz-3 GHz, with TG, Preamplifier, Modulation analysis, Reflection meas, Receiver mode and Advanced measurements
FPC Options and Accessories
FPC-B2, Spectrum Analyzer Frequency Upgrade 1GHz - 2GHz (software license)
FPC-B200, Wifi Support (software license) requires FPC-Z2 (accesory)
FPC-B22, Spectrum Analyzer Preamplifier (software license)
FPC-B3, Spectrum Analyzer Frequency Upgrade 2 GHz - 3 GHz (software license)
FPC-K42, Vector reflection measurement (for FPC1500 only) (software license)
FPC-K43, Receiver Mode (software license)
FPC-K55, Advanced Measurements (Channel power, OBW, TOI, Harmonic Distortion, Spectrogram Display) (software license)
FPC-K7, Modulation Analysis (AM, FM, ASK, FSK) (software license)
FPC-Z1, Cableset FPC to HM6050-2 USB and RF
FPC-Z10, RF Teaching Kit (accessory)
ZZA-FPC1, Rackmount Kit for 19" Rack
FPL Spectrum/Signal Analyzers
FPL1003 Spectrum analyzer 5 kHz to 3 GHz, -148 dBm to +30 dBm, resolution bandwidth 1 Hz to 10 MHz, 10.1 in multi-touch screen
FPL1003-P1 Bundled product: FPL1003 Spektrum analyser 5kHz to 3GHz
FPL1003-P2 Bundled product: FPL1003 Spektrum analyser 5kHz to 3GHz, OCXO Frequency Reference, FPL1-B5 Additional Interfaces, GPIB Interface
FPL1003-P3 Bundled product: FPL1003 Spektrum analyser 5 kHz to 3 GHz, -148 dBm to +30 dBm, DC Power Supply 12/24V, Internal Li-Ion Battery
FPL1003-P4 Bundled product: FPL1003 Spektrum analyser, 5kHz to 3GHz, OCXO Frequency Reference, FPL1-B5 Additional Interfaces, GPIB Interface, DC Power Supply 12/24V, Internal Li-Ion Battery
FPL1003-P5 Bundled product: FPL1003 Spectrum Analyzer 5kHz to, 3GHz, OCXO Frequency Reference, FFPL1-B5 Additional Interfaces, Internal Generator, GPIB Interface
FPL1003-P6 Bundled product: FPL1003 Spectrum Analyzer 5kHz to, 3GHz and including eight options
FPL-EMI3 Bundled product for EMI Debugging: FPL1003 Spectrum Analyzer 5 kHz, 3 GHz, - FPL1-B5 Additional Interfaces, Internal Generator, RF Preamplifier, EMI Measurements
FPL1007 Spectrum analyzer 5 kHz to 7.5 GHz, -148 dBm to +30 dBm, resolution bandwidth 1 Hz to 10 MHz, 10.1 in multi-touch screen
FPL1007-P6 Bundled product: FPL1007 Spectrum Analyzer 5kHz to, 7.5GHz and including eight option
FPL-EMI7 Bundled product for EMI Debugging: FPL1003 Spectrum Analyzer 5 kHz, 7.5 GHz, - FPL1-B5 Additional Interfaces, Internal Generator, RF Preamplifier, EMI Measurements
FPL1014 Spectrum analyzer 5 kHz to 14 GHz, -148 dBm to +30 dBm, resolution bandwidth 1 Hz to 10 MHz, 10.1 in multi-touch screen
FPL1026 Spectrum analyzer 5 kHz to 26.5 GHz, -148 dBm to +30 dBm, resolution bandwidth 1 Hz to 10 MHz, 10.1 in multi-touch screen
FPL1026-P1 Bundled product: FPL1026, Spectrum Analyzer 5 kHz to 26.5 GHz and including eight options
FPL Options and Accessories
FPL1-B10 Additional interface for remote control, by GPIB, plug-in unit, (hardware option)
FPL1-B11 Microwave preselector bypass for, wide analysis bandwidths at center, frequency > 6 GHz, (software license)
FPL1-B19 Second hard disk, for FPL1000, premounted on PC-board, including analyzer Firmware, for exchange against standard hard drive, (hardware option)
FPL1-B22 RF preamplifier, 14 GHz, Gain 20 dB, (software license)
FPL1-B22 RF preamplifier, 2 MHz to 3 / 7.5 GHz, Gain 20 dB, (software license)
FPL1-B22 RF preamplifier, 26 GHz, Gain 20 dB, (software license)
FPL1-B25 1 dB steps for the electronic attenuator, (software license)
FPL1-B30 DC Power supply for 12/24 V supply, voltage, plug-in unit, (hardware option)
FPL1-B31 Li-Ion battery pack for internal, battery slot, includes charging unit, retrofittable in R&S Service, (hardware option)
FPL1-B4 OCXO, precision frequency reference, aging/Year: < 1x10-7 (hardware option)
FPL1-B40 Extension to 40 MHz, signal analysis bandwidth, (software license)
FPL1-B5 Additional interfaces: User port, noise source control, power sensor, IF/video/demod out, AF output, plug-in unit, (hardware option)
FPL1-B9 Internal Generator, 5 kHz - 3 GHz (for FPL1003), (factory fitted option)
FPL1-B9 Internal Generator, 5 kHz - 7.5 GHz (for FPL1007), (factory fitted option)
FPL1-K30 Noise Figure and Gain Measurement, (software license).
FPL1-K40 Phase Noise Measurement Application, (software license)
FPL1-K54 EMI measurement application, for diagnostics of RF interference, (software license)
FPL1-K7 Modulation analysis application, for modulation analysis of analog, (AM, FM, PM) modulated single, carrier signals, (software license)
FPL1-K70 Vector Signal Analysis Application, for modulation analysis on digital, modulated single carrier signals, (software license)
FPL1-K70M Vector Signal Analysis Application for, Modulation Analysis of Signals with, Multiple Modulations, (FPL1-K70 Required), (software license)
FPL1-K70P BER Measurement Application with, PRBS Data, (FPL1-K70 Required), (software license)
FPL1-K9 Power sensor measurements with, NRP power meters, (software license)
FPL1-Z1 Protective hard cover, for FPL1000 and ZNL/ZNLE
FPL1-Z2 Transport bag for FPL1000 and, ZNL/ZNLE, transparent cover
FPL1-Z3 H-style shoulder harness for FPL1000, and ZNL for portable Operation (requires FPL1-Z2)
FPL1-Z4 Spare battery pack, for FPL1000 and ZNL
FPL1-Z6 Rack mount kit, for FPL1000 in RAL 5014 pigeon blue, (Retrofit by user)
FPL1-Z7 Adapter cable from the analyzer's, 25-pin AUX port to the generator's, BNC trigger input.