We use cookies in order to guarantee the best possible service. If you continue browsing the site you consent to our cookie use.

AR-1U1000 1 Watt CW, 10 KHz - 1000 MHz

FREQUENCY RESPONSE: 10kHz to 1000 MHz

RATED OUTPUT POWER: 1 W minimum

INPUT FOR RATED OUTPUT: 0 dBm maximum

POWER OUTPUT @ 3dB COMPRESSION: 

  • Typical: 1.5 watts, Minimum: 1.0 watt

POWER OUTPUT @ 1dB COMPRESSION: 

  • Typical: 1.5 watts, Minimum: 1.0 watt

FLATNESS:

  • ±0.8 dB typical
  • ±1 dB maximum

GAIN: 30 dB minimum

INPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum

OUTPUT IMPEDANCE: 50 ohms, nominal

MISMATCH TOLERANCE: 100% of rated power without foldback. Will operate without damage or oscillation with any magnitude and phase of source and load
impedance. See Application Note #27.

MODULATION CAPABILITY: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal

HARMONIC DISTORTION: Minus 20 dBc maximum at 1 watts

THIRD ORDER INTERCEPT POINT: 42 dBm typical

Product Number:

AR-1U1000

Manufacturer:

Amplifier Research

Quantity:

Total
Unit price
base price
Stock
Call or email for delivery time

The Model 1U1000 is a solid-state, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish, contemporary cabinet, the unit is designed for benchtop use.
The Model 1U1000, when used with a sweep generator, will provide a minimum of 1 watt of RF power. Included is a front panel gain control, which permits the operator to conveniently set the desired output level.
The 1U1000 is protected from RF input overdrive by an RF input leveling circuit, which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm. The Model 1U1000 is equipped with a control panel, which provides a gain control adjustment knob.
The Model 1U1000 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, wattmeter calibration, and as a driver for frequency multipliers and higher power amplifiers.

Description
Additional Informations
Reviews
Query on the Item
Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha
Description
Reviews
Query on the Item

The Model 1U1000 is a solid-state, self contained, air-cooled, broadband amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. Housed in a stylish, contemporary cabinet, the unit is designed for benchtop use.
The Model 1U1000, when used with a sweep generator, will provide a minimum of 1 watt of RF power. Included is a front panel gain control, which permits the operator to conveniently set the desired output level.
The 1U1000 is protected from RF input overdrive by an RF input leveling circuit, which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0dBm. The Model 1U1000 is equipped with a control panel, which provides a gain control adjustment knob.
The Model 1U1000 provides readily available RF power for typical applications such as RF susceptibility testing, antenna and component testing, wattmeter calibration, and as a driver for frequency multipliers and higher power amplifiers.

Do you have any questions on this item?
Your E-mail Address
My Question:
Please retype the letters shown here
captcha