ADIVIC-MP7300 RF Recorder/Player
MP7300 RF recorder and player system covers the frequency spectrum from 300 KHz to 3 GHz. It satisfies various wireless communication applications. The RF recorder can support a large range of digital or analog modulation signals in the frequency spectrum. The new design concept complies with Diversity and Dual Channel RF record and play application.
With the bandwidth of acquisition 45MHz, it allows users to record and analyze the wide band wanted channel signal, adjacent channel signal, noise/fading signal and any distortion signals accordingly.
The ADIVIC MP7 SERIES is an excellent RF engineering tool for both field-testing and performance testing. MP7300 is engineered for all existing RF communications and all modulation schemes, analogue and digital. The 45MHz real-time bandwidth makes the satellite and wideband communication recorder more possibility.
Standards:
Worldwide Navigation Standards
- GPS, GLONASS, GALILEO, CNSS, (CHINA), QZSS (JAPAN)
Worldwide Radio Broadcasting Standards
- FM/RDS/TMC, IBOC - HD Radio, Satellite Radio, DAB/DAB+
Worldwide TV Broadcasting Standards
- DVB-C, DVB-C2, OPEN Cable, ATSC, DTMB, NTSC, PAL, SECAM
- DVB-T/H, DVB-T2, DVB-SH, CMMB, ISDB-T, ISDB-T
- MediaFLO, ATSC-MH, T-DMB
RF Signal Analyzer Specifications | |
---|---|
Frequency range | 300 KHz to 3 GHz |
Continous Bandwidth | 45 MHz |
Frequency resolution | 1 KHz step minimum |
Resolution bandwidth (RBW) | Fully adjustable (100 Hz to 3 MHz) |
Spectral purity | |
Phase Noise @ 1 KHz offset, 1 GHz | < -80 dBc/Hz |
RF input Spurious Response | < -90 dBm |
Noise Density | |
Passive Port (Gain : 40 dB / 100 MHz) | < -165 dBm/Hz |
Active Port (Gain : 20 dB / 100 MHz) | < -145 dBm/Hz |
Amplitude (Passive Port) | |
Input level Accuracy ( 15 to 35 deg C) | < ±1dB |
Input signal range @ CW mode | -145 dBm to -30 dBm |
Amplitude (Active Port) | |
Input level Accuracy ( 15 to 35 deg C) | < ±1dB |
Input signal range @ CW mode | -135 dBm to +10 dBm |
RF input | |
Passive RF input | 50 ohm, AC-coupled N female |
Active RF input | 50 ohm, DC-coupled N female |
IF Band | |
Resolution | 16-bit |
Sample rate | 250 MS/s |
Storage | SSD 300GB X 4 |
RF Signal generator Specifications |
|
Frequency range | 25 MHz to 3 GHz |
Real-time bandwidth | 45 MHz maximum |
Frequency resolution | 1 KHz / step minimum |
Spectral purity | |
Phase Noise @ 1 KHz offset, 1 GHz | < -80 dBc/Hz |
Second harmonic | < -40 dBc |
Output third-order distortion (IMD) | -70 dBc Typical |
RF Output Characteristics | |
Output power range | -145 dBm to +5dBm |
Amplitude resolution | 0.1 dB step minimum (BW dependency) |
Amplitude Accuracy | < ±1 dB, -100 dBm to -10 dBm |
< ±2 dB, < -100 dBm | |
Noise Floor@1GHz | |
-40 dBm output power | < -150 dBm/Hz Typical |
-50 dBm output power | < -160 dBm/Hz Typical |
Flatness | |
IF Band(20MHz) flatness | 1 dB Typical |
Group delay | 30 ns Typical |
RF Signal Analyzer Specifications | |
---|---|
Frequency range | 300 KHz to 3 GHz |
Continous Bandwidth | 45 MHz |
Frequency resolution | 1 KHz step minimum |
Resolution bandwidth (RBW) | Fully adjustable (100 Hz to 3 MHz) |
Spectral purity | |
Phase Noise @ 1 KHz offset, 1 GHz | < -80 dBc/Hz |
RF input Spurious Response | < -90 dBm |
Noise Density | |
Passive Port (Gain : 40 dB / 100 MHz) | < -165 dBm/Hz |
Active Port (Gain : 20 dB / 100 MHz) | < -145 dBm/Hz |
Amplitude (Passive Port) | |
Input level Accuracy ( 15 to 35 deg C) | < ±1dB |
Input signal range @ CW mode | -145 dBm to -30 dBm |
Amplitude (Active Port) | |
Input level Accuracy ( 15 to 35 deg C) | < ±1dB |
Input signal range @ CW mode | -135 dBm to +10 dBm |
RF input | |
Passive RF input | 50 ohm, AC-coupled N female |
Active RF input | 50 ohm, DC-coupled N female |
IF Band | |
Resolution | 16-bit |
Sample rate | 250 MS/s |
Storage | SSD 300GB X 4 |
RF Signal generator Specifications |
|
Frequency range | 25 MHz to 3 GHz |
Real-time bandwidth | 45 MHz maximum |
Frequency resolution | 1 KHz / step minimum |
Spectral purity | |
Phase Noise @ 1 KHz offset, 1 GHz | < -80 dBc/Hz |
Second harmonic | < -40 dBc |
Output third-order distortion (IMD) | -70 dBc Typical |
RF Output Characteristics | |
Output power range | -145 dBm to +5dBm |
Amplitude resolution | 0.1 dB step minimum (BW dependency) |
Amplitude Accuracy | < ±1 dB, -100 dBm to -10 dBm |
< ±2 dB, < -100 dBm | |
Noise Floor@1GHz | |
-40 dBm output power | < -150 dBm/Hz Typical |
-50 dBm output power | < -160 dBm/Hz Typical |
Flatness | |
IF Band(20MHz) flatness | 1 dB Typical |
Group delay | 30 ns Typical |